§ 185-125
Gross density requirements
The maximum number of dwellings to be permitted in an R-40C or R-25C District shall be computed by multiplying 1.1 times the number obtained by dividing the basic minimum lot size for the appropriate R-40 or R-25 District into the total land area of the proposed development parcel, in square feet, adjusted by deducting the area of environmentally sensitive property. This computation shall be as follows:
| U | = | 1.1 x [DA-NA], where: |
| LA | ||
| U | = | Number of permitted dwelling units |
| DA | = | Area of proposed development parcel in square feet |
| NA | = | Area of that part of the development parcel which is either a freshwater wetland, or a coastal zone subject to the jurisdiction of the Coastal Resources Management Council, or any sensitive, fragile or environmentally significant areas as designated by the Town Council, such as but not limited to wetlands, marshes and water bodies. |
| LA | = | Basic minimum lot size for the district, as follows: |
| R-40C District - 40,000 square feet | ||
| R-25C District - 25,000 square feet | ||
| The value of U thus derived shall be rounded to the nearest whole number. | ||