Accessory uses, buildings, and structures—Dimensional standards
Accessory uses, buildings, and structures are subject to the following dimensional standards:
A. In any residential district, accessory uses shall be those customarily incidental to uses listed as permitted, provided, however, an accessory use shall be prohibited in front yards and shall be located not less than twenty (20) feet back from any line adjoining a street.
B. The following Table of Dimensional Standards for Accessory Uses, Buildings, and Structures establishes the setback and height requirements of accessory buildings and structures defined in Section 17.78.010, and any other accessory use outlined in Section 17.78.030(A)—(G).
Table of Dimensional Standards for Accessory Uses, Buildings, and Structures
|
Zoning
District |
Accessory
Building or Structure Front Setback Requirement |
Accessory Building/
Structure (max. height of 12 ft) Side and Rear Setback |
Accessory Building/
Structure (>12 ft in height) Side and Rear Setback |
Accessory Building/
Structure Height Limit |
Raised Patios that are excluded from Lot Coverage Calculation |
| R-3 | 20' |
3' side,
5' rear |
10' | 26' | Up to 32" |
| R-4 | 20' | 5' | 10' | 26' | Up to 32" |
| R-6 | 20' | 5' | 10' | 26' | Up to 32" |
| R-10 | 20' | 5' | 10' | 26' | Up to 32" |
| R-l0A | 20' | 5' | 10' | 26' | Up to 32" |
| R-20 | 30' | 5' | 10' | 26' | Up to 32" |
| R-40 | 50' | 10' | 20' | 26' | Up to 48" |
| R-40A | 50' | 10' | 20' | 28' | Up to 48" |
| R-60 | 50' | 10' | 20' | 28' | Up to 48" |
| R-120 | 75' | 25' | 50' | 28' | Up to 48" |
| R-160 | 100' | 25' | 50' | 28' | Up to 48" |
| LB | 0' |
0' side,
5' rear |
0' side,
5' rear |
30' | N/A |
| WB | 0' | 5' | 5' | 30' | N/A |
| GB | 0' |
0' side,
5' rear |
0' side,
5' rear |
30' | N/A |
| CI | 100' | 20' | 20' | 30' | N/A |
| IH | 0' | 0' | 0' | 30' | N/A |
| TM | 0' or 5' | 5' | 5' | 30' | N/A |
| OS | 40' | 80' | 80' | 30' | N/A |
| RD | 40' | 80' | 80' | 30' | N/A |
(Ord. No. 2024-19, § 1, 7-24-2024; Ord. No. 2024-31, § 1, 9-25-2024; Ord. No. 2025-26, § 1, 3-26-2025)