§ 502
DIMENSIONAL STANDARDS
502 DIMENSIONAL STANDARDS
A. General Standards Table 5-1: Commercial District Dimensional Standards establishes the dimensional standards for the commercial districts. These regulations apply to all uses within each district unless a different standard is listed for a specific use.
| TABLE 5-1: | COMMERCIAL DISTRICT DIMENSIONAL | STANDARDS | ||
| C-2 | C-3 | |||
| Bulk Standards | ||||
| Minimum Lot Area | None | None | ||
| Minimum Building Height | 16’ | None | ||
| Minimum First Story Height | 9’ Residential use 11’ Non-Residential use | 9’ Residential use 11’ Non-Residential use | ||
| Maximum Building Height | 50’, not to exceed 4 stories | 50’, not to exceed 4 stories | ||
| Maximum Building Coverage | None | None | ||
| Total Maximum Impervious Surface Coverage | None | None | ||
| Minimum Setback Requirements | ||||
| Front Setback | Build-to zone of 0’ to 5’ - see 503.A.6 for built-to percentage requirement | None; unless multi-tenant retail center, then 503.B apply | ||
| Interior Side Setback | None; unless abutting residential district, then 10’ | None; unless abutting residential district, then 10’ | ||
| Corner Side Setback | Build-to zone of 0’ to 5’ - see 503.A.6 for built-to percentage requirement | None | ||
| Rear Setback | None, unless abutting residential district, then 10’ | None, unless abutting residential district, then 20’ |